Xposed Framework

Xposed | Installer | Modules | Guides

Xposed Framework Yureka plus installation guide

 

Xposed Framework Yureka plus. Download Xposed Installer and Follow the instruction of installing xposed framework on Yureka Plus. Basically Yureka plus have android 5.1.1 and cyanogenmod  12.1. So here is the full method just follow and get Xposed Framework on Yureka plus.

Xposed framework lollipop 5.1 

Xposed framework Marshmallow 

xposed framework yureka

Requirements for xposed framework on Yu Yureka Plus :

  • Custom Recovery installed TWRP Recovery in yureka plus
  • Have “unknown sources” enabled
  • Download the Framework.zip file and XposedInstaller.apk file (download links bellow)

Disclaimer: Please follow this guide at your own risk. Xposedframework.net will not be liable if your device gets damaged or bricked during the process.


How to install xposed framework on Yu Yureka Plus

Step 1: Find Your Device’s CPU Architecture & Android Version

There are three different versions of the Xposed Framework for Lollipop devices, and each is designed for a specific CPU architecture. It can be fairly difficult to find your device’s CPU architecture, so if you don’t know this information off the top of your head, I’d suggest that you download a free app called Hardware Info.

Once you’ve installed Hardware Info, simply open the app and tap the “Processor” entry. From here, look for one of three CPU architecture types—ARMv7, ARM64, or x86. The exact location of these CPU architecture names will vary, but you should see one of the three somewhere under the Processor category.

From there, head to the “About Phone” or “About Tablet” menu in Settings, then take note of your Android Version, as this will be used to determine the right files that you’ll need to download.

Step 2: Download Necessary Files

There are two core elements to Xposed—one is the Xposed Framework, which lays all of the groundwork, and the other is the Xposed Installer app, which allows you to download and manage modules. First up, grab a copy of the Installer from the following link, as this is the same for all devices:

Nowadays, the Framework will have to be flashed in custom recovery. There are 3 different version of the Framework for Android 5.0.X, and three more versions for Android 5.1.X. So first up, if your device is running Android 5.0through Android 5.0.2, download the ZIP below that matches your CPU architecture type:

On the other hand, if your device is running Android 5.1 through Android 5.1.1, find the link below that matches your CPU architecture to download the proper Xposed Framework ZIP for your device:

Step 3: Boot into Custom Recovery

When the files have finished downloading, the next step is to boot into custom recovery. To do that, start by powering your device completely off. This next part may vary, but for most devices, press and hold the volume down and power buttons simultaneously.

This will bring up Android’s Bootloader menu. From here, use the volume down button to highlight “Recovery mode,” then press the power button to select it.

Step 4: Install the Framework in Custom Recovery

Before you flash anything in custom recovery, it’s always a good idea to make a full NANDroid backup. That’s extra important in this case, since the Xposed Framework is in its early stages and may cause issues with some devices. Do not skip this step!

Then, to get started, go ahead and tap the “Install” button from TWRP’s main menu. Next, navigate to your device’s Download folder, then select the Xposed ZIP file that you downloaded in Step 1.

After that, just swipe the slider at the bottom of the screen to install the Framework, and when that’s finished, tap “Reboot System.”

Your device will take longer than normal to boot up here. This is because the Xposed Framework ZIP had to clear away some library files, which will need to be restored. Expect this process to take at least 10 minutes.

Step 5: Install the Xposed Installer App

When you get back up, it’s time to install the actual Xposed Installer app. Tap the Download Complete notification for the “XposedInstaller_3.0-alpha4.apk” file, then press “Install” and “Open” on the next two menus.

At this point, you should be looking at that familiar Xposed interface we all know and love. Head to the “Download” section to begin browsing modules, but keep in mind that some may not work on Lollipop.

2 Comments

Add a Comment
  1. Hey I have rooted yureka plus.downloaded both of your softwares. Flashing of zip file worked fine…..then when I pressed reboot system it got bricked.i unbricked it.now plz help me to install zip file without getting bricked.

  2. someone pls help me rooting my yureka plus

Leave a Reply

Your email address will not be published. Required fields are marked *

Xposed Framework © 2016 Frontier Theme